Avatar FX

Homepage

 prev slide  prev slide  prev slide
AVATAR FX / Select your language:     English         Italian
iPhone 1 iPhone 2
Mouse Scroll

VERIFICATION CODE

Inside every FX box you'll find a card with a unique code to verify the authenticity of the product. Each card has a scratchable area under which you'll find the serial number to be
registered at VERIFICATION CODE.


Full Auto Mode

You vape, FX handles the rest...




Man looking at watch

How does the Auto Mode work?

The easiest way to use the FX.
5 power levels to choose from, automatically optimized on the characteristics of the cartomizer for the best vape performances.

LEVEL 1
LOW
LEVEL 2
MEDIUM LOW
LEVEL 3
MEDIUM
LEVEL 4
MEDIUM HIGH
LEVEL 5
HIGH
Slide Image 01
Slide Image 01
Slide Image 01






Manual Mode

Vape making the most of your Avatar FX
Man looking at watch

How does the Manual Mode work?


The manual mode allows you to configure the FX with custom settings.

Watt, Volt, Impedance, Cut-Off and more features are available to the most expert vapers.











TECHNICAL FEATURES

Find out in detail everything that makes FX a Box unique.
1
2
3
4
5
6
7
8
9
10
11

1. PROTECTION


FX ceases working when V is lower than 3.3V (to be recharged ). FX ceases charging when V is higher than 4.25V. Battery protection chip onboard the PCB.

2. MICROUSB RECHARGE PLUG



Micro USB plug for charging, protected by silicone band.

3. TIME & DATE



You can set time & date that will always be visible on the wide screen of the FX.

4. AUTOMATIC & MANUAL MODE

What makes the difference between the FX and the other boxes is the possibility of choosing between two modes, a fully automatic and fully manual one. The automatic mode allows anyone to use the FX without worrying about Watt, Volt or the cartom used. Based on the ohm, FX automatically calculates the best performance by providing 5 levels ofpower, from lowest to highest. The selection of the level is made simple by the large screen and the user friendly interface. The manual mode is reserved for the most experienced vapers. The configuration of Watt and Volt is completely free, from 1V to 8V and from 7W to 30W. Both modes can use coils down to 0.3 ohms and configure the cut-off time and the coil protection.

5. HOME/ON-OFF BUTTON

This button has two functions:

Turn on and off the FX: to turn on and off the FX, hold the button for 3 seconds.

Return to the Home screen configuration: you can return to Home from any screen by pressing the Home button once.

6. MULTI-DIRECTIONAL JOYSTICK



The multi-directional joystick lets you move around the interface and select the desired configurations.

7. EGO/510 THREAD



FX is equipped with both 510 and EGO thread to adapt to any type of cartomizer.

8. CUT-OFF SELECTION


The CUT-OFF is a security feature that allows you to limit the duration of the power output to the cartomizer. Each cartomizer has its own puff time limit, beyond which the inflow of liquid to the coil is no longer sufficient. On FX you can choose a range between 8 and 18 seconds.

9. BATTERY CAPACITY 2.500 MAH



The integrated battery has a capacity of 2.500 mAh.

10. REPLACEABLE BATTERY



The battery can be replaced by an authorized Puff service center in case of failure or end of its working lifetime.

11. REPLACEABLE SCREEN



The screen can be replaced by an authorized Puff service center in case of breakage or malfunction.

12. PLASTIC SCREEN COVER



The plastic protection of the LCD screen can be replaced by an authorized Puff service center if broken.

13. PROTECTION 0,3 - 9,9 OHM


The choice of ohm protection is configurable between 0.3 ohm and the 9.9 ohm. This function is very useful when you do not know the impedance of a cartomizer and you want to select a threshold below which you do not want to vape.

14. ADAPTIVE USB OUT


The adaptive USB port out delivers a minimum of 500 mAh up to a maximum of 2,1A. Depending on the product that you want to recharge the electronic of the FX calculates the need of the device and provides only the necessary amperage.

15. OPERATING SYSTEM OSP 1.0


The Operative System OSP 1.0 has been designed exclusively for FX. It manages the entire device and makes it easy and comfortable to use the user interface thanks to the 2.4 "screen. OSP 1.0 can be restored or upgraded thanks to micro USB plug that, as well as allowing the recharge of the device, can also carry data to the internal processor. Restoring or updating the OSP can be done by an authorized Puff service center.

16. 240X320 PIXEL RESOLUTION



The 2,4" screen is 240 X 320 pixel resolution, 262K colors RGB.

17. 2,4" SCREEN



2,4" LCD color screen.

18. 7W - 30W


FX delivers a maximum output of 30W with a minimum of 7W. Watts can be freely adjusted in the manual mode, but they are independently adjusted by the device in the automatic mode. Being Watt, Volt and Ohm interconnected and given a fixed impedance (ohms of the cartomizer), if Watts change, Volts will change accordingly and vice versa.

19. OVERHEATING PROTECTION



Overheating internal protection when temperature goes over 50┬░ C.

20. 1V - 8V


FX delivers a maximum output of 8V and a minimum of 1V. Volts can be freely adjusted in the manual mode, but they are independently adjusted by the device in the automatic mode. Being Watt, Volt and Ohm interconnected and given a fixed impedance (ohms of the cartomizer), if Watts change, Volts will change accordingly and vice versa.

21. SHORT CIRCUIT PROTECTION BELOW 0,3 OHM



Short circuit protection when ohm is below 0.3ohm.
12
13
14
15
16
17
18
19
20
21




- FIRST STEPS -



01. SELECT LANGUAGE

The first time you turn on the FX, the user is prompted to choose a language: ITALIAN / ENGLISH. The language choice can always be changed from the SETTINGS menu.



02. SETTING DATE & TIME

After choosing the language the user is prompted to set the date and time. The date and time can always be changed from the SETTINGS menu.



03. SELECT SETTINGS

Inside the Main menu, in addition to the automatic and manual mode, you can change the FX settings: CUT-OFF, OUTPUT ON/OFF, PROTECTION, TIME/DATE, LANGUAGE.



04. SELECT MODE

Within the Main Menu you will have to decide which mode you want to vape, whether automatic or manual.



05. SETTING SELECTED MODE

Once you make your selection, you will configure the selected mode.
iPad
Mouse Scroll

CUSTOMIZE YOUR AVATAR FX

Thanks to the possibility of replacing its components, Avatar FX lends itself to an easy and immediate customization. Replace the outer shell of your FX according to your style.

Coming Soon...




ACCESSORIES REPLACEMENT

EVERYTHING ON YOUR FX CAN BE REPLACED

Replacing the exterior and interior components, you can always have a new FX.








GALLERY